Please use this identifier to cite or link to this item:
Title: Analytical formulation for the deformations of I-shapes and RHS at the plastic strain ultimate limit state
Authors: Baptista, A. M.
Muzeau, J. P.
Keywords: Analytical model;Elastic-plastic behaviour;Cross-section;Global deformation;Internal forces;Plastic limit state;Ductility;I-shapes;Rhs
Issue Date: 2008
Publisher: ELSEVIER
Abstract: The development of “full plastic hinges” in the most stressed cross-sections is a common hypothesis considered in the elastic–plastic design of steel structures. The equations for the internal forces at the plastic limit state are then based on equilibrium conditions only, and they do not allow the global deformations corresponding to each combination of internal forces at this ultimate limit state to be estimated. This paper presents a simplified analytical model for the elastic–plastic analysis of rectangular hollow sections and bisymmetrical I-sections bent about their strong axis. This model states the relations between the global deformations (axial deformation and bending curvature) and the corresponding internal forces (axial force and bending moment) at the cross-section plastic strain ultimate limit state. It allows a realistic evaluation of the cross-section ductility, based on a relevant strain limitation at the most strained cross-section fibres.
Appears in Collections:DE/NCE - Comunicações a congressos e artigos de revista

Files in This Item:
File Description SizeFormat 
JCSR-D-06-00143R1 Abstract.pdf6.66 kBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.