Please use this identifier to cite or link to this item: http://repositorio.lnec.pt:8080/jspui/handle/123456789/1014653
Full metadata record
DC FieldValueLanguage
dc.contributor.authorParracha, J.pt_BR
dc.contributor.authorBorsoi, G.pt_BR
dc.contributor.authorFlores-Colen, I.pt_BR
dc.contributor.authorVeiga, M. R.pt_BR
dc.contributor.authorLina Nunespt_BR
dc.date.accessioned2022-03-18T16:36:20Zpt_BR
dc.date.accessioned2022-04-08T08:41:32Z-
dc.date.available2022-03-18T16:36:20Zpt_BR
dc.date.available2022-04-08T08:41:32Z-
dc.date.issued2022-01-24pt_BR
dc.identifier.citationhttps://doi.org/10.1016/j.conbuildmat.2021.125834pt_BR
dc.identifier.urihttp://repositorio.lnec.pt:8080/jspui/handle/123456789/1014653-
dc.description.abstractMultilayer external wall thermal insulation systems are widely used in new constructions and for the retrofitting of building façades. Despite the increasing use as constructive solution, significant anomalies have been frequently identified on these systems only few years after their application, raising questions on their long-term durability. This paper focuses on the effects of one-year natural ageing and artificial ageing through hygrothermal cycles (heat/rain and heat/cold) on the water performance (capillary water absorption and drying kinetics), bio-susceptibility (mould development) and surface properties (colour, gloss, and roughness) of four multilayer external wall thermal insulation systems (three ETICS and a thermal rendering system). Results showed a significant loss of surface hydrophobicity after ageing. Considering the 24 h water absorption results,an increase up to 73% and 432% was obtained for the naturally and artificially aged systems, respectively, and when compared to the reference unaged systems. The drying kinetics was affected by ageing, with increases of the drying resistance ranging between 47% and 122% after artificial ageing. Traces of mould growth were observed on the artificially aged systems; however, no growth was detected on either the unaged or the one-year naturally aged systems. Substantial colour change for all systems after ageing was observed, confirming aesthetic alteration. Results contribute towards the development of implemented artificial ageing protocols, as well as for the delivery of multilayer thermal systems with enhanced performance and durability.pt_BR
dc.language.isoengpt_BR
dc.publisherElsevierpt_BR
dc.relationFCT PTDC/ ECI-EGC/30681/2017 (WGB_Shield)pt_BR
dc.relationFCT DFA/BD/5180/2020pt_BR
dc.rightsrestrictedAccesspt_BR
dc.subjectMultilayer thermal systempt_BR
dc.subjectETICSpt_BR
dc.subjectThermal mortarpt_BR
dc.subjectDurabilitypt_BR
dc.subjectArtificial ageingpt_BR
dc.subjectNatural ageingpt_BR
dc.titleImpact of natural and artificial ageing on the properties of multilayer external wall thermal insulation systemspt_BR
dc.typeworkingPaperpt_BR
dc.description.volume317, 125834pt_BR
dc.description.sectorDE/NCEpt_BR
dc.description.magazineConstruction and Building Materialspt_BR
dc.contributor.peer-reviewedSIMpt_BR
dc.contributor.academicresearchersSIMpt_BR
dc.contributor.arquivoNAOpt_BR
Appears in Collections:DE/NCE - Comunicações a congressos e artigos de revista

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.