Please use this identifier to cite or link to this item: http://repositorio.lnec.pt:8080/jspui/handle/123456789/1011993
Title: Two-way bending out-of-plane collapse of a full-scale URM building tested on a shake table
Authors: Correia, A.A.
Candeias, P.
Campos Costa, A.
Tomassetti, U.
Graziotti, F.
Keywords: Shake table;Out-of-plane;Collapse;Timber roof;Non-structural components;Vertical acceleration
Issue Date: Apr-2019
Publisher: Springer
Citation: 10.1007/s10518-018-0507-5
Abstract: This paper describes a shake table test on a one-storey full-scale unreinforced masonry structure, which complements an earlier testing of a two-storey structure with similar characteristics. The building specimen was meant to represent the upper floors of the end-unit of a terraced house, built with cavity walls and without any particular seismic design or detailing. In these specimens, the masonry walls were composed of two leaves: a load-bearing inner one made of calcium silicate bricks sustaining a reinforced concrete floor and an external leaf made of clay-bricks connected to the inner leaf by means of metallic ties. A pitched timber roof was supported by two triangular gable walls. Floor acceleration response histories of the previously tested two-storey specimen were used as input motions. An incremental dynamic test, with vertical and horizontal inputs, was carried out up to the explicit collapse of some bearing elements of the structure. In particular, a two-way bending out-of-plane collapse of a load-bearing wall was observed and described.
URI: http://repositorio.lnec.pt:8080/jspui/handle/123456789/1011993
Appears in Collections:DE/NESDE - Comunicações a congressos e artigos de revista

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.