Please use this identifier to cite or link to this item: http://repositorio.lnec.pt:8080/jspui/handle/123456789/1011327
Full metadata record
DC FieldValueLanguage
dc.contributor.authorFortunato, E.pt_BR
dc.contributor.authorPaixão, A.pt_BR
dc.contributor.authorMorais, P.pt_BR
dc.contributor.authorSantos, Carlospt_BR
dc.contributor.authorFrancisco, A.pt_BR
dc.contributor.authorVarandas, J.pt_BR
dc.contributor.authorAsseiceiro, F.pt_BR
dc.contributor.authorCruz, J.pt_BR
dc.contributor.authorCruz, N.pt_BR
dc.contributor.editorPombo, J.pt_BR
dc.date.accessioned2019-02-04T11:26:14Zpt_BR
dc.date.accessioned2019-03-08T15:37:53Z-
dc.date.available2019-02-04T11:26:14Zpt_BR
dc.date.available2019-03-08T15:37:53Z-
dc.date.issued2018-09pt_BR
dc.identifier.urihttp://repositorio.lnec.pt:8080/jspui/handle/123456789/1011327-
dc.description.abstractThe rehabilitation and construction works for the reinforcement of old railway track platforms is a complex, time-consuming and costly process that often causes significant disturbances to normal train operation (Selig & Waters, 1994). Although different reinforcement approaches have been used in the past (INNOTRACK, 2008; Indraratna et al., 2011; Li et al., 2016), from soil replacement to reinforcement with geosynthetics, only a few allow performing the treatment or applying the reinforcement with minimal hindrance to railway operation. In this context, the reinforcement the track foundation, through injection of binders, without removing the ballast layer or the track components, is of paramount importance. Although this approach is not new, it still poses challenges in terms of railway operation, construction processes and quality assurance. For example, according to Li et al. (2016), slurry injection in the track platform has been used on railways since the 80’s and with mixed results. One of the main drawbacks has been the difficulty to penetrate the slurry into the clay soils and achieve an adequate dispersion. Although reports indicate that the pressures used with this method do cause hydraulic fracture of the soil, the dispersion of slurry is somewhat poor (Karol, 1983). Soil mixing is another method with significant potential, which was studied in the EU project INNOTRACK (2008; Kouby et al., 2010) using a smaller and modified drill to create vertical soil-cement columns with diameters of up to 700 mm to a depth up to 15 m (Melentijevic et al., 2013). The RUFEX project followed up that initiative and focused on industrializing a way of reinforcing the railway platforms in the French network (Calon et al., 2011). In this paper, the authors present preliminary results of a research project - GroutRail - currently underway in Portugal.pt_BR
dc.language.isoengpt_BR
dc.publisherCivil-Comp Presspt_BR
dc.rightsrestrictedAccesspt_BR
dc.subjectRailway trackpt_BR
dc.subjectSubgrade reinforcementpt_BR
dc.subjectSoil–binder columnspt_BR
dc.titleA research project on the reinforcement of old railway track platforms using short soil binder columnspt_BR
dc.typeworkingPaperpt_BR
dc.identifier.localedicaoStirlingshire, UKpt_BR
dc.description.pages4ppt_BR
dc.identifier.localSitges, Spainpt_BR
dc.description.volumeA10.01pt_BR
dc.description.sectorDT/NITpt_BR
dc.identifier.conftitle4th International Conference on Railway Technology: Research, Development and Maintenance (Railways 2018)pt_BR
dc.contributor.peer-reviewedSIMpt_BR
dc.contributor.academicresearchersSIMpt_BR
dc.contributor.arquivoNAOpt_BR
Appears in Collections:DT/NIT - Comunicações a congressos e artigos de revista

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.