Please use this identifier to cite or link to this item: http://repositorio.lnec.pt:8080/jspui/handle/123456789/1006737
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRodrigues, M. P.pt_BR
dc.contributor.editorLiliana Baltazarpt_BR
dc.contributor.editorJoão Santanapt_BR
dc.contributor.editorBeatriz Lopespt_BR
dc.contributor.editorM. Paula Rodriguespt_BR
dc.contributor.editorJoão R. Correiapt_BR
dc.date.accessioned2014-12-15T17:23:02Zpt_BR
dc.date.accessioned2017-04-13T11:25:35Z-
dc.date.available2014-12-15T17:23:02Zpt_BR
dc.date.available2017-04-13T11:25:35Z-
dc.date.issued2014-07pt_BR
dc.identifier.urihttp://repositorio.lnec.pt:8080/jspui/handle/123456789/1006737-
dc.description.abstractSilicate-based impregnations are often used to protect concrete against aggressive external actions. However, the understanding of several aspects concerning this type of impregnations is still rather Iimited, incIuding the influence of the concrete substrate on their performance. This paper presents reslllts of an experimental study about O) the efficacy of silicate-based impregnations to protect concrete elements, and (ii) the inflllence of the concrete substrate's characteristics on the performance of such superficial protection. Concrete specimens with two different water/cement ratios (0.40 and 0.70) were produced and, prior to the application of the impregnation, were prepared following different procedllres that created O) three different surface roughnesses (no surface preparation, 160 bar water jet and needle scalers) and (ii) three different moisture contents (3.0%, 4.5% and 6.0%). The performance ofunprotected and protected concrete specimens was assessed by means of the following procedures, indicated in EN 1504-2 standard: O) product penetration depth; (ii) water absorption by immersion; (iii) abrasion resistance; Ov) impact resistance; and (v) bond strength. Results obtained show that the silicate-based impregnation was effective in improving the resistance to water penetration and abrasion resistance, but did not improve the resistance to impacto The surface roughness and the moisture content at the instant of the application of the surface protection proved to influence the performance of the impregnation product, however such influence was dependent on the property at stake.pt_BR
dc.language.isoengpt_BR
dc.publisherELSEVIERpt_BR
dc.rightsopenAccesspt_BR
dc.subjectConeretept_BR
dc.subjectSurfaee proteetionpt_BR
dc.subjectImpregnationpt_BR
dc.subjectSilieatespt_BR
dc.subjectSubstratept_BR
dc.subjectRoughnesspt_BR
dc.subjectMoisturept_BR
dc.titleSurface skin protection of concrete with silicate-based impregnations:Influence of the substrate roughness and moisturept_BR
dc.typearticlept_BR
dc.identifier.localedicaowww.elsevier.com/locate/conbuildmatpt_BR
dc.description.pages191-200pppt_BR
dc.description.volumeVol 70 (2014)pt_BR
dc.description.sectorDM/NMOpt_BR
dc.description.magazineConstruction and Building Materialspt_BR
Appears in Collections:DM/NMO - Comunicações a congressos e artigos de revista

Files in This Item:
File Description SizeFormat 
Elsevier_2014.pdfDocumento principal1.38 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.