Please use this identifier to cite or link to this item: http://repositorio.lnec.pt:8080/jspui/handle/123456789/1005162
Full metadata record
DC FieldValueLanguage
dc.contributor.authorFontinha, I. R.pt_BR
dc.contributor.authorSalta, M. M.pt_BR
dc.contributor.authorZheludkevich, M.pt_BR
dc.contributor.authorFerreira, M. G. S.pt_BR
dc.contributor.authorFigueira, R. B.pt_BR
dc.contributor.authorPereira, E. V.pt_BR
dc.date.accessioned2013-09-13T12:08:09Zpt_BR
dc.date.accessioned2014-10-20T16:31:39Zpt_BR
dc.date.accessioned2017-04-13T11:40:58Z-
dc.date.available2013-09-13T12:08:09Zpt_BR
dc.date.available2014-10-20T16:31:39Zpt_BR
dc.date.available2017-04-13T11:40:58Z-
dc.date.issued2013-09-03pt_BR
dc.identifier.isbn978-989-8601-31-5pt_BR
dc.identifier.urihttp://repositorio.lnec.pt:8080/jspui/handle/123456789/1005162-
dc.description.abstractIn this work, the effect of alloy surface pre-treatments on the corrosion behaviour of sol–gel hybrid coated EN AW 6063 alloy was studied. Four pre-treatments were used: solvent degreasing; alkaline degreasing followed by acid etching; alkaline degreasing followed by alkaline plus acid etching and alkaline degreasing followed by acid etching and oxide growth in boiling water. SEM/EDS revealed that the alloy surface depends on the pre-treatment. The alkaline plus acid cleaned samples exhibited a very smooth deoxidized surface. All the others showed a rougher surface with an oxide layer which is more homogenous and denser in the samples subjected to the oxide growth step. The sol-gel hybrid coating was synthesized from glycidoxypropyltrimethoxysilane (GPTMS) and zirconium n-propoxide (TPOZ) precursors and applied to metallic substrate by dip-coating. The corrosion behaviour of the hybrid coated samples was evaluated by Electrochemical Impedance Spectroscopy (EIS) and by an accelerated corrosion test. Complimentary to the corrosion study, the adhesion of the hybrid sol-gel coating was evaluated by crosscut and bend tests. The corrosion tests revealed that the pre-treatment that includes the oxide growth step leads to the best protection performance, followed by the alkaline degreasing and alkaline plus acid etching one. However, the latter exhibits the worst adhesive behaviour, attributed to the smoother, deoxidized surface of the substrate.pt_BR
dc.publisherSociedade Portuguesa de Materiaispt_BR
dc.relation.ispartofseriesEFC Event NR.;343pt_BR
dc.rightsopenAccesspt_BR
dc.subjectHybrid sol-gel coatingspt_BR
dc.subjectAluminium corrosionpt_BR
dc.subjectAlloy pre-treatmentpt_BR
dc.titleEffect of the metallic surface pre-treatment on the corrosion behaviour of sol-gel hybrid coated EN AW-6063 alloypt_BR
dc.typeconferenceObjectpt_BR
dc.identifier.seminarioEuropean Corrosion Congress - EUROCORR 2013pt_BR
dc.identifier.localEstoril, Portugalpt_BR
dc.description.sectorDM/NMMpt_BR
dc.description.year2013pt_BR
dc.description.data1-5 Septemberpt_BR
Appears in Collections:DM/NMM - Comunicações a congressos e artigos de revista

Files in This Item:
File Description SizeFormat 
Eurocorr2013Abstract_1543.pdf27.31 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.